~:Catatan Belajar MazHel:~

Monitor CPU, MotherBoard & Hard Disk Health on ubuntu

Posted in linux c0rner, Tips & Trik, ubuntu, Uncategorized by m42h31 on 17 Desember 2009


Memonitor suhu CPU, motherboard dan harddisk tidak kalah pentingnya dari memonitor kesehatan harddisk dari bad sector . Panas yang berlebihan merupakan masalah tersendiri bagi para pengguna komputer, banyak orang mendiskusikan mengenai HSF untuk mendapatkan suhu sekecil mungkin. Baiklah saya tidak mau panjang lebar membahas HSF karena saya bukan ahlinya😀. saya akan bahas gimana cara monitoring suhu CPU, MB & HDD di sistem operasi kesayangan saja. mari kita simak :

Cara install-nya :
sudo apt-get install lm-sensors xfce4-sensors-plugin sensord i2c-tools xsensors

Konfigurasinya : klu mau gampang di YES~YES aja.. hehe..
m42h31@m42h31-desktop:~$ sudo sensors-detect
# sensors-detect revision 5249 (2008-05-11 22:56:25 +0200)

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you’re doing.

We can start with probing for (PCI) I2C or SMBus adapters.
Do you want to probe now? (YES/no): yes
Probing for PCI bus adapters…
Use driver `i2c-i801′ for device 0000:00:1f.3: Intel 82801G ICH7

We will now try to load each adapter module in turn.
Load `i2c-i801′ (say NO if built into your kernel)? (YES/no): yes
Module loaded successfully.
If you have undetectable or unsupported I2C/SMBus adapters, you can have
them scanned by manually loading the modules before running this script.

To continue, we need module `i2c-dev’ to be loaded.
Do you want to load `i2c-dev’ now? (YES/no): yes
Module loaded successfully.

We are now going to do the I2C/SMBus adapter probings. Some chips may
be double detected; we choose the one with the highest confidence
value in that case.
If you found that the adapter hung after probing a certain address,
you can specify that address to remain unprobed.

Next adapter: NVIDIA i2c adapter (i2c-0)
Do you want to scan it? (YES/no/selectively): yes
Client found at address 0x50
Probing for `Analog Devices ADM1033’… No
Probing for `Analog Devices ADM1034’… No
Probing for `SPD EEPROM’… No
Probing for `EDID EEPROM’… Yes
(confidence 8, not a hardware monitoring chip)
Client found at address 0x51
Probing for `Analog Devices ADM1033’… No
Probing for `Analog Devices ADM1034’… No
Probing for `SPD EEPROM’… No
Probing for `EDID EEPROM’… Yes
(confidence 8, not a hardware monitoring chip)
Client found at address 0x52
Probing for `Analog Devices ADM1033’… No
Probing for `Analog Devices ADM1034’… No
Probing for `SPD EEPROM’… No
Probing for `EDID EEPROM’… Yes
(confidence 8, not a hardware monitoring chip)
Client found at address 0x53
Probing for `Analog Devices ADM1033’… No
Probing for `Analog Devices ADM1034’… No
Probing for `SPD EEPROM’… No
Probing for `EDID EEPROM’… Yes
(confidence 8, not a hardware monitoring chip)

Next adapter: NVIDIA i2c adapter (i2c-1)
Do you want to scan it? (YES/no/selectively): yes

Next adapter: NVIDIA i2c adapter (i2c-2)
Do you want to scan it? (YES/no/selectively): yes

Next adapter: NVIDIA i2c adapter (i2c-3)
Do you want to scan it? (YES/no/selectively): yes

Next adapter: NVIDIA i2c adapter (i2c-4)
Do you want to scan it? (YES/no/selectively): yes

Next adapter: NVIDIA i2c adapter (i2c-5)
Do you want to scan it? (YES/no/selectively): yes
Client found at address 0x50
Probing for `Analog Devices ADM1033’… No
Probing for `Analog Devices ADM1034’… No
Probing for `SPD EEPROM’… No
Probing for `EDID EEPROM’… No
Client found at address 0x51
Probing for `Analog Devices ADM1033’… No
Probing for `Analog Devices ADM1034’… No
Probing for `SPD EEPROM’… No
Probing for `EDID EEPROM’… No
Client found at address 0x52
Probing for `Analog Devices ADM1033’… No
Probing for `Analog Devices ADM1034’… No
Probing for `SPD EEPROM’… No
Probing for `EDID EEPROM’… No
Client found at address 0x53
Probing for `Analog Devices ADM1033’… No
Probing for `Analog Devices ADM1034’… No
Probing for `SPD EEPROM’… No
Probing for `EDID EEPROM’… No

Next adapter: SMBus I801 adapter at 0500 (i2c-6)
Do you want to scan it? (YES/no/selectively): yes
Client found at address 0x50
Probing for `Analog Devices ADM1033’… No
Probing for `Analog Devices ADM1034’… No
Probing for `SPD EEPROM’… Yes
(confidence 8, not a hardware monitoring chip)
Probing for `EDID EEPROM’… No
Client found at address 0x52
Probing for `Analog Devices ADM1033’… No
Probing for `Analog Devices ADM1034’… No
Probing for `SPD EEPROM’… Yes
(confidence 8, not a hardware monitoring chip)
Probing for `EDID EEPROM’… No

Some chips are also accessible through the ISA I/O ports. We have to
write to arbitrary I/O ports to probe them. This is usually safe though.
Yes, you do have ISA I/O ports even if you do not have any ISA slots!
Do you want to scan the ISA I/O ports? (YES/no): yes
Probing for `National Semiconductor LM78′ at 0x290… No
Probing for `National Semiconductor LM78-J’ at 0x290… No
Probing for `National Semiconductor LM79′ at 0x290… No
Probing for `Winbond W83781D’ at 0x290… No
Probing for `Winbond W83782D’ at 0x290… No
Probing for `IPMI BMC KCS’ at 0xca0… No
Probing for `IPMI BMC SMIC’ at 0xca8… No

Some Super I/O chips may also contain sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): yes
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor’… No
Trying family `SMSC’… No
Trying family `VIA/Winbond/Fintek’… No
Trying family `ITE’… Yes
Found `ITE IT8718F Super IO Sensors’ Success!
(address 0x290, driver `it87′)
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor’… No
Trying family `SMSC’… No
Trying family `VIA/Winbond/Fintek’… No
Trying family `ITE’… No

Some south bridges, CPUs or memory controllers may also contain
embedded sensors. Do you want to scan for them? (YES/no): yes
Silicon Integrated Systems SIS5595… No
VIA VT82C686 Integrated Sensors… No
VIA VT8231 Integrated Sensors… No
AMD K8 thermal sensors… No
AMD K10 thermal sensors… No
Intel Core family thermal sensor… No
Intel AMB FB-DIMM thermal sensor… No

Now follows a summary of the probes I have just done.
Just press ENTER to continue:

Driver `it87′ (should be inserted):
Detects correctly:
* ISA bus, address 0x290
Chip `ITE IT8718F Super IO Sensors’ (confidence: 9)

I will now generate the commands needed to load the required modules.
Just press ENTER to continue:

To load everything that is needed, add this to /etc/modules:

#—-cut here—-
# Chip drivers
it87
#—-cut here—-

Do you want to add these lines automatically? (yes/NO)yes
h3lmy@h3lmy-desktop:~$ cat /etc/modules
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with “#” are ignored.

lp

# Generated by sensors-detect on Thu Dec 17 07:01:57 2009
# Chip drivers
it87

Konfigurasi diatas akan menambahkan driver chip ke /etc/modules.
berikutnya sampean harus menjalankan perintah ini chmod u+s /usr/sbin/hddtemp agar plugins sensor mendapatkan akses ke hard disk temperature sebagai user.
terakhir restart komputernya..
setelah restart coba jalankan Sensor Viewernya di Applications > System Tools > Sensor Viewer

sumber : brad trupp & moojix

Tinggalkan Balasan

Isikan data di bawah atau klik salah satu ikon untuk log in:

Logo WordPress.com

You are commenting using your WordPress.com account. Logout / Ubah )

Gambar Twitter

You are commenting using your Twitter account. Logout / Ubah )

Foto Facebook

You are commenting using your Facebook account. Logout / Ubah )

Foto Google+

You are commenting using your Google+ account. Logout / Ubah )

Connecting to %s

%d blogger menyukai ini: